Characteristics and application of toughening modifier CPE

CPE is an abbreviation for chlorinated polyethylene. It is white powder after drying and is non-toxic.
Characteristics of CPE:
Since the CPE molecule does not contain double chains, it has good weather resistance, and has better flame resistance and thermal stability than PVC, and has low cost and excellent performance. Soluble in aromatic hydrocarbons and halogenated hydrocarbons, insoluble in aliphatic hydrocarbons, decomposes above 170 °C, emits hydrogen chloride gas, it has stable chemical structure, excellent aging resistance, flame resistance, cold resistance, weather resistance, free coloring, resistance Chemical, ozone and electrical insulation as well as good compatibility and processability, can be blended with PVC, PE, PS and rubber to improve its physical properties.
Application of CPE:
1. Application in waterproofing membrane CPE-increasing PVC waterproofing membrane, due to the excellent characteristics of CPE, the tensile strength of the new product is increased by 80%, the tear strength is increased by 50%, and its mechanical weathering resistance and low temperature resistance are Performance such as aging resistance is improved. It is very popular among the construction department (the amount of CPE added is 10%-15%). Neoprene CPE waterproofing membrane and neoprene CPE styrene butadiene rubber waterproofing membrane have the advantages of high strength, high elasticity, high elongation, corrosion resistance, high temperature resistance, cold resistance, aging resistance and flame retardancy. The waterproof material has a broad market.
2. Blending plastic doors and windows with CPE and PVC to improve the elasticity, toughness and low temperature performance, weather resistance, heat resistance and chemical stability. The plastic doors and windows are cheap, corrosion-resistant and colorful. Bright, more prominent than aluminum alloy doors and windows, has largely replaced aluminum doors and windows, and the market will become more and more broad.
3. Application in wire and cable sheath: The addition of CPE can improve its yin burning performance, anti-aging performance and physical and mechanical properties. It can also be made into CPE as the main body, and it is made of wire and cable covering material with excellent performance.
4. Incorporating CPE elastomer into PE can improve its printability, flame resistance and flexibility. After adding 5% CPE to HDPE, the adhesion of the resulting mixture to the ink was increased by a factor of three. It has good flame retardant performance after adding CPE to mine PE hose.
5, CPE as the main material application: can produce oil-resistant, acid-resistant, folding, ozone-resistant and freon resistant performance of the hose, suitable for the manufacture of hydraulic hoses, cooler hoses, fuel hoses and so on. The imitation leather sole made of CPE has excellent performance.
6. Application of CPE in the transmission belt: It can manufacture heat-resistant transmission belt, and has good resistance to non-polar solvent swelling. The adhesion and flexing times of the tape layers of the transmission belt produced by using CPE/NR/SBR and rubber are used. It is higher than the transmission belt made of pure rubber, which prolongs the service life, and also improves the shrinkage of the pure rubber compound after rolling, the poor permeability of the pressure-delay rubber in the textile, and the easy bonding of the molded preform. Improve the weather resistance and flame retardancy of the belt.
7. CPE is used together with other rubbers: CPE has good compatibility with various rubbers, and CPE and NR are blended. Its wear resistance, fatigue resistance, acid resistance and alkalinity are better. Compared with NBR and CR, the price is better. low. CPR and NBR have improved oil resistance and excellent heat-resistant oxygen aging properties, and can be used to manufacture oil-resistant hoses and oil-resistant sealing products.
 
CPE main technical indicators:

model

index

135A

140L

130B

135B

235C

CM352

Chlorine content%

33-37

38-42

28-32

33-37

33-37

33-37

Heat of fusion ≤

2

2

2

2

2

Shore hardness ShoreA (3S) 4

60

60

70

60

75

56

Sieve residue

0.9mm%≤

2.0

-

-

-

2.0

2.0

Volatile %≤0

0.4

0.4

0.4

0.4

0.4

0.4

Mooney viscosity

-

90-110

60-80

60-90

-

55-75


CPE models and main uses:

Product number

characteristic

The main purpose

CPE135A

Good aging resistance, good chemical resistance, high mechanical strength, good high temperature performance

Hard PVC impact modifier, high strength special rubber products

CPE140L

High mechanical strength, good oil resistance, good flame retardancy and excellent elasticity

High flame retardant, high oil resistant rubber products

CPE135B

Menoli is high, so that the product has better tensile strength

Suitable for rubber fields with good mechanical properties

CPE130B

Good cold resistance, excellent fluidity and good wrapping performance

High cold resistant wrapped rubber products, magnetic materials, etc.

CPE235C

Has good fluidity and mechanical properties

Compatibilizer and impact modifier for flame retardant ABS injection molded products

CM352

Has a low Mooney viscosity, good processing performance, moderate oil resistance and flame retardancy

Extrusion of rubber products such as sheath or insulation of wire and cable, automotive hoses, etc.



Observation Elevator

With the development of science and technology, our elevators are no longer limited to seeing the outside scenery. In many shopping malls, tourist spots and other places, we can take sightseeing elevators. It can not only meet the needs of passengers, but also make the buildings more beautiful and more beautiful, so that passengers can enjoy the comfort of elevator operation, but also enjoy the beautiful scenery around. It can be widely used in various public places such as shopping malls, stations, docks, airports, shopping malls, entertainment centers, exhibition halls, etc.

Observation Elevator,View Elevator,Scenic Lift,Sightseeing Elevator

Suzhou Stable Trade Co., Ltd , https://www.stable-elevator.com

Posted on