First, do a good job at the grassroots level before paving
Before paving, should be dealt with until the body or ground leveling, dry shop floor to achieve a certain degree of hardness can be paved bricks, paving more than 2-3mm between the joint adjustment.
Second, need to try before paving
Before paving, try the shop on the ground first. After using the same color number and size, mark the number at the bottom of the brick. If the brick surface has a pattern or directional pattern, the product should be paved as shown in the figure. For the best decorative effect.
Third, the proposed surface wiping wax antifouling
The vitrified tiles are made of porcelain wear-resistant bricks. After the surface is polished, microscopic holes that are invisible to the naked eye can be routinely observed. Therefore, it is better to wipe the floor water wax before each vitrified tile is applied. Before paving, first check whether the surface of the vitrified tile has been waxed. If not, it must be waxed after construction. Judging the method of waxing: See if there is waxy material on the brick surface. The feeling on the brick surface is hazy. If you touch it by hand, there will be fingerprints.
Tile tiles
4 Person Hot Tub
4 Person Hot Tub,home outdoor spa,outside jacuzzi pool,round hot tub,garden hot tubs
Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.hottubdesign.com