![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Imprinted concrete steps detailed process
Imprinted concrete is a new type of green building material in the new era. As the most outstanding special belt for road building materials, you will be able to express the texture, texture and color of many different ground materials directly on the concrete surface. So what is the procedure for our imprinted concrete?
The embossed concrete consists of a subgrade at the bottom, a layer of concrete on the base and then a color reinforcement, a mold release powder and a seal protection agent. The construction of the embossed concrete is not complicated, but only according to our construction procedures. It can be done, of course, but also pay attention to the details of the treatment, after all, the details determine the success or failure. The construction steps of imprinted concrete in Plinde, Liaoning, are roughly as follows; the transfer of the construction face—the construction preparation and the basic excavation of the original plutonium—wash the original plutonium base—the paver—pave the fine plinth—vibration, slope finding, and troweling - Surface light harvesting - Spreading color reinforcement - Smoothing light collection - Spreading powder - Mold - Edge repair - cutting expansion joints, curing for at least a week - cleaning - on the seal protection agent. Embossed concrete can be widely used in various functional roads, squares and garden roads. Walls can also be repaired and filled on the roads of existing old roads. The texture of materials is solid, thick and solid, but the color is stable but not boring. It is an ideal alternative to the current color plaza in the square.
Plinde, Liaoning, is generally selected for outdoor printing of concrete, and it should be avoided in rain or windy weather. Our embossed concrete should wait 2-3 days after it is fully laid, and then rinse it with water. On the surface, at the same time, Liaoning Plinder has always been customer-centric and has put customer interests first for decades. Liaoning Plinde welcomes your inquiries.
Besides DMX Cable, we also privide ower and signal cable for led lighting connection, such as 444t cable, 442t cable, 2 female end, 44I cable, and so on. In order to catch less cable wiring in a low voltage led lighting project we combine power and signal wire in one cable, which share same GND wire. The function is same as 2 wire but save time to connect the led lighting cables and save cost in extension cable in a big project.
Photo show of Power And Signal Cable:
Signal Cable,Dmx Lighting Cable,Led Wiring,444T Cable
Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com