Home>Bearing knowledge>Manipulation of data elements that affect bearing life

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Manipulation of data elements affecting bearing life

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

In order to make the above-mentioned data elements affecting the life of the bearing in the best condition; the primary requirement is to control the original arrangement of the steel before quenching; the technical measures that can be adopted are: high temperature (1050 ° C) austenitizing and cooling to 630 ° C isothermal normalizing Pseudo-eutectoid fine pearlite arrangement; perhaps cooled to 420 ° C isothermal treatment; obtain bainite arrangement. Can also use wrought waste heat blast annealing; obtain fine-grained pearlite arrangement; to ensure fine and uniform dispersion of carbides in steel The original arrangement of this condition is in the austenitization of quenching heating; in addition to the carbides dissolved in austenite; the undissolved carbides will be aggregated into fine particles.
When the original arrangement in the steel is punctual; the carbon content of the quenched martensite (ie the austenite carbon content after quenching heating), the amount of retained austenite and the amount of undissolved carbide depend primarily on the quenching heating temperature and persistence. Time; followed by quenching heating temperature increase (time must be); steel in the amount of undissolved carbide reduction (hardened martensite carbon content increased), the amount of retained austenite increased; hardness is first added with the increase of quenching temperature; arrival The peak value then decreases with the increase of temperature. When the quenching heating temperature is punctual; the extension of the austenitizing moment; the reduction of the amount of undissolved carbide; the increase of the amount of retained austenite; the increase of hardness; This tendency is slowed down. When the carbides in the original arrangement are fine; because the carbides are easily dissolved into austenite; the hardness peak after quenching is shifted to a lower temperature and occurs at a shorter austenitizing moment.
In summary, the undissolved carbides of GCrl5 steel after quenching are about 7%; the retained austenite is about 9% (the uniform carbon content of cryptocrystalline martensite is about 0.55%) is the best arrangement. And; when the original arrangement of fine carbides. Zhi Ji Ren Bao Hui Kang Kang fresh 鏊 南 South halo (19) 橹槌墒 挥 诨竦 诨竦 诨竦 诨竦 诨竦 ρ ρ ρ 埽 埽 埽 埽 埽 埽 埽 埽 埽倜. It should be pointed out; the original arrangement with finely dispersed carbides; the quenching heating and heat preservation; the undissolved fine carbides will gather and grow; roughen them. Thus; the quenching heating moment of the bearing parts with such original arrangement Should not be too long; use the rapid heating austenitizing quenching process; will achieve higher inductive mechanical properties.
In order to quench the bearing parts after quenching and tempering, the surface has a large compressive stress; the carburizing or nitriding atmosphere can be introduced during the quenching heating; the external carburizing or nitriding is performed in a short time. The practice of carbon is not high; it is much lower than the equilibrium concentration shown on the phase diagram; thus it can absorb carbon (or nitrogen). When austenite is rich in higher carbon or nitrogen; its Ms decreases; when quenching The surface layer has a martensite transformation after the inner layer and the core; a large residual compressive stress is generated. The GCrl5 steel is heated and quenched in a carburizing atmosphere and a non-carburizing atmosphere (all subjected to low temperature tempering), and the touch fatigue test is performed. It can be seen that the life of external carburizing is 1.5 times higher than that of non-carburizing. The reason is that the surface of carburized parts has large residual compressive stress.
3 The main data elements and the degree of control that affect the service life of high carbon chromium steel rolling bearing parts are:
.1) The carbide requirements in the original arrangement of the steel before quenching are fine and diffuse. The high temperature austenitizing 630 ° C, or 420 ° C high temperature can also be used, which can also be completed by the wrought waste heat blast annealing process.
.2) After quenching of GCr15 steel; microscopic arrangement of undissolved carbides with a uniform carbon content of about 0.55% cryptocrystalline martensite, about 9% Ar and about 7% in a uniform and round state This microscopic arrangement can be manipulated by quenching the heating temperature and timing.
.3) After the quenching of the parts, the residual surface has a large compressive stress after the tempering; this will contribute to the progress of the fatigue resistance. The treatment process of carburizing or nitriding in a short time at the time of quenching heating may be selected; There is a large compressive stress.
.4) Producing steel for bearing parts; demand has high purity; the first is to reduce the content of O2, N2, P, oxide and phosphide. Optional electroslag remelting; vacuum training and other technical measures to make the data oxygen The quantity ≤ 15PPM is suitable.

---

Recommend to friends comments close window

Bearing related knowledge

The use of bearings - mining and processing and disposal of the correct use of NTN bearing methods in detail on the fine import of the process of anti-rust between the new process of bearing grinding processing skills analysis of rolling bearing fault diagnosis of useful tricks

This article links to http://
Please indicate China Bearing Network http://

Previous:Selection of bearing layout Next: Analysis of the smooth method of common rolling mill bearings

Pvc floor mats

PVC floor mats are a common and popular choice for home and office flooring. They offer many benefits, including durability, convenience, and stylish appeal.

The durable nature of PVC floor mats means they can withstand years of use, with some models even boasting over 10 years of use. This makes them a great choice for both residential and commercial use.

Moreover, PVC floor mats can be easily installed and removed, making them convenient to use. They can be installed in minutes, and can be easily removed and changed if needed. This makes them a perfect solution for busy home owners or office workers.

Additionally, PVC floor mats can add a touch of class and style to any space. They can be easily coordinated with other furniture and accents, and can even enhance the overall look of a space.

Finally, PVC floor mats are highly efficient in terms of cleaning. They can be easily removed with soap and water, and can even be machine-cleaned. This makes them a great choice for those who want to keep their flooring clean and tidy.

In conclusion, PVC floor mats are a durable, convenient, and stylish choice for home and office flooring. They are perfect for both residential and commercial use, and can enhance the overall look and experience of a space. They are a must-have outdoor accessory for anyone who values practicality and the enjoyment of the outdoors.

Pvc Floor Mat,Flooring Pvc Mat,Pvc Floor Mat For Room,Pvc Floor Mats For Home

Jiangyin Yining E-Commerce Co., Ltd , https://www.jypvcmatyining.com