Matters needing attention when assembling the bottle blowing machine

The precautions for assembling the gears of the blow molding machine are as follows.
â‘  The gear of the bottle blowing machine is based on the reference plane, and it should be aligned and laid flat to ensure that the center line of the shaft is perpendicular to the reference plane of the gear and coincides with the center line of the gear hole.
â‘¡If there is a shoulder on the assembly shaft, pay attention that the reference end face of the gear should be tight against the shoulder of the shaft.
â‘¢ For the gear without fixed gear shoulder on the shaft, you can drill the tapping hole on the gear wheel and fix the gear with screws to prevent the gear from axial movement. Precautions during gear assembly The correct installation position of the gear and the transmission shaft, and the manufacturing accuracy of the gear have a great influence on the working life of the gear and the size of the transmission noise. It lists the gear transmission meshing position, the correctness of the gear assembly and the mutual influence between the gear manufacturing accuracy, for the maintenance worker to refer to when repairing the gear transmission.

Reprinted address: http: //

================================================== ================================================== ======

Angle Straightening Machine

China Angle Straightening Machine Suppliers

Bar Straightening Machine,Angle Straightening Machine,Sheet Straightening Machine,Steel Bar Straightening Machine

Shandong EN FIN CNC Machinery Co., Ltd , https://www.sdfincncmachine.com