Mold classification and working conditions

Mold classification and working conditions

Molds are tools that force metal or non-metal forming. On the one hand, the mold is subjected to friction by metal or non-metal, and on the other hand, the extruded material reverses the mold to a relatively large compressive stress. Therefore, the mold should have high strength and hardness, and at the same time should have a certain degree of toughness. There are many varieties of molds, and the classification methods are not the same. According to different conditions of use, the molds are mainly divided into three types: hot work molds, cold work molds and plastic molds.

(1) Hot work die

The hot work die is a tool for deforming the metal at a certain temperature. In addition to being subjected to a large compressive stress, the hot work die is also subjected to the friction of the hot metal to the mold cavity. Hot work molds can be divided into hammer forging die, machine forging die, hot extrusion die and die-casting die. The working conditions of these four types of molds are quite different, so the performance requirements are also different. For example, the hammer forging die has high requirements on toughness, and the die-casting die mainly has high requirements for strength and wear resistance at high temperature and good cold-heat fatigue performance, and the hot extrusion die mainly requires the material to have good at high temperature. Strength and wear resistance.

(2) Cold work die

A cold work die generally refers to a mold that is processed at room temperature. During the processing, the temperature of the mold is increased due to the friction between the material and the surface of the mold. According to the working condition of the cold working die, it can be divided into four categories: punching die, drawing die, cold die and cold extrusion die. In the cold stamping process, the deformation resistance of the punched material is relatively large, and the working part of the mold, especially the cutting edge, is strongly rubbed and pressed, so the mold should have high hardness, strength and wear resistance. In addition, the die is subjected to the impact force during the working process, and also has certain requirements on the toughness of the die, especially when stamping thick steel plates or thick steel plates with small punching holes, the mold is required to have good toughness. For the tensile die, the working part is required to have high wear resistance, good adhesion resistance and certain toughness, wherein the wear resistance is a key property determining the life of the mold. Adhesion is a common problem in the stretching process. It is a phenomenon in which the metal is bonded to the cavity of the mold during the force flow molding process. Continued stretching will deteriorate the surface finish of the part. If it is serious, it will not continue to work.

In the cold heading and cold extrusion process, the deformed material and the mold are contradictory sides. In order to deform the extruded material, the mold is applied to the material to be deformed with a large pressure, and the deformed material acts with the same large reaction force. On the mold, resist deformation. Therefore, on the one hand, the cold and cold extrusion die should have sufficient strength and toughness to ensure that the die is not upset or broken during the working process; on the other hand, the working surface and cavity of the die must have sufficient hardness. And the hardened layer deforms the workpiece. Generally, the hardness of the cold die requires about HRC 58-60, and the cold extrusion die is about HRC 61-63.

(3) Plastic mould

According to different plastic varieties, plastic molds can be divided into: thermosetting plastic molds and thermoplastic molds. The former includes: press molds and injection molds, and the latter includes blow molds in addition to press molds and injection molds.

The working conditions of the plastic mold are as follows: the thermosetting plastic mold is subjected to heat (200-250 ° C), which is subject to high stress, easy to wear and easy to be eroded, and has a large heat load and serious wear due to a large amount of solid filler. Thermoplastic molds are heated, stressed, and worn, and some contain corrosive gases. They generally do not contain fillers and are softened into the mold.

The performance requirements for plastic molds are:

1) have sufficient strength and toughness and still need to maintain sufficient mechanical properties at the working temperature;

2) The surface is wear-resistant and the surface hardness is about HRC48-53, and the hardness of the thermoplastic mold can be lower;

3) It is guaranteed to have interchangeability of precision, and the cavity size accuracy is generally 3-5 grades;

4) The cavity is smooth and the molding surface is required to be polished.

references

[1] "Alloy Steel" writing group. alloy steel. Mechanical Industry Press, 1976

[2] Economic and Technical Consulting Department of China Die & Mould Industry Association. Mold materials and heat treatment, 1995

[3] Department of Metallurgy, Tianjin University. Mold heat treatment. Tianjin People's Publishing House, 1974

PH-B-L6

Phlizon`s COB series Grow Light emits all the wavelengths of light which can be fully absorbed by the plants to create.

Best full Specturm designed to perfectly match large areas of indooor plants, especially for Medical Plant.

COB + Dual-chip,most efficient spectrum,high PPFD.Two cooling fans with double ball(import from Japan) and big aluminum heat sink to protect the grow lights from high temperature,good cooling,long lifespan.Photosynthesis and promote healthy growth budding and flowering.

1000w/2000w /3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.

Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.

3000w led grow light Features

Indoor grow light

COB series, high power branded CREE COB with high Par value and deeper penetration

VEG/BLOOM and STRONGER switches for each grow stage.

Special spectrum for plant growing to increase the yield.

Building to Harvest: Beneficial for seeding to fruiting stage.

Good quality fans with low noise.

Easy to install by minute

Energy Saving, environmental friendly

3 Years Warranty

Compare led grow light to traditional HPS/MH grow light

WHAT MAKE UP AN EXCELLENT LED GROW LIGHT ?

1.PPFD Value : PPFD is Photosynthetic Photon Flux Density. When you choose a plant light, you should compare the PPFD values of different plant lights. The larger the value, the better the growth of the plant.

2.Actual Power: Because the actual power of the plant light always varies with different conditions, all Amazon sellers use the rated power to describe the power of the product because the rated power is constant. When you pick a LED grow light, the rated power of the plant light is a reference, and more importantly is the actual power.

3.Core Coverage: In addition to the above two, when you choose a plant light, you also need to compare the cover area of different plant lights, of course, the size of the core coverage area. In general, in germination stage, you can hang the plant light higher and the cover area is larger. In flowering stage you can hang the plant light lower and the cover area is smaller because the plant needs more light at this stage. You have to compare different coverage areas to choose the plant light that suits you.

Detailed images of 1000w 2000w 3000w 400w cob led grow light

Applications

Hydroponics, Horticulture, Agriculture and Greenhouse

Locations: Farm, Exhibition, Garden, Home, Urban, Bonsai, and University Lab

Growth of Fruits, Vegetables, Flowers and so on

Seeding, Rooting, Breeding, Flowering and Fruiting period

Packaging and Shipping

3. Customers specifying freight forwarders or negotiable shipping methods!

4. Delivery Time: stock avaiable sample will be delivered immediately ; 3-7 days for trial order; 7- 25 days for batch goods

Suggestions:

1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.

2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.

3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.

4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp

Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.

PHLIZON LOOKING FOR DISTRIBUTOR ALL OVER THE WORLD

If you are interested in, and

1.own several store for agriculture in your local market

2.or in the business of grow light equipment

3.or good relationship with grower or greenhouse owner

To be a distributor, max support will be offered:

1.price support

2.technical support

3.new product support

4.24 hours after-sales service online

PH-B-L6,Optic Cree Cob Grow Light,600W Led Indoor Grow Lights,630W Led Grow Light,Cob 3000W Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumgrowlight.com