Technical analysis of inorganic thermal insulation materials

In recent years, reflective building insulation coatings have been widely used as a new type of energy-saving materials. Experiments have shown that the use of thermal insulation coatings on the roof and exterior walls can effectively reduce the internal surface temperature during the summer, improve indoor comfort and reduce the power consumption of air conditioners, thus playing an important role in environmental protection and energy conservation.

Reflective thermal insulation coating is based on synthetic resin, combined with multi-functional pigments, fillers (such as hollow microspheres, high oxidation resistance, corrosion-resistant metal particles, etc.) and additives. It is applied to the surface of buildings with reflection barrier. The hot-functional coating has the advantages of good heat insulation effect, light coating quality and good durability. According to GB/T25261-2010 reflective heat-insulating coating for building, the equivalent thermal resistance of reflective thermal insulation coatings, the value of which is affected by the air conditioning (heating) time and temperature difference in summer and winter, so the equivalent thermal resistance in different regions The values ​​are also different. In this paper, through the energy efficiency measurement of reflective insulation coatings for high-rise, multi-layer and low-rise building types with body shape coefficients ranging from 0.34 to 0.44, the recommendations for the equivalent thermal resistance of reflective insulation coatings in Chongqing are proposed.

Fo—the average compressive strength of the specimen after carbonization (MPa); the average compressive strength of the fcc-comparative specimen (MPa).

At the same time, the surface of the test piece is free from cracks, delamination and falling layers, and the advantages and disadvantages of carbonation resistance are measured.

2.5.2 Thermal storage coefficient St thermal storage coefficient indicates the thermal inertia of the foam insulation board material, which refers to the property of the material against the temperature change under the action of periodic heat. Materials with large heat storage coefficients have poor resistance to temperature changes. The heat storage coefficient is an important criterion for measuring the function of the insulation board.

The heat storage coefficient can be carried out according to the GB/T17146 standard. The test piece size is: 300x100x100mm and can also be calculated by the measured thermal conductivity. According to the heat cycle of a cycle (24h), the heat storage coefficient is: Act—the thermal conductivity of the insulation board material.

The heat storage coefficient of foamed cement and foamed magnesium cement insulation board should be less than 1.2.

3 Conclusion Inorganic thermal insulation materials are the most promising materials under the premise of building insulation and fire protection materials, but both material performance and application technology need to be improved and improved. Mixin is guiding the building energy conservation policy. Under the unremitting efforts of the vast number of engineering and technical personnel, the development prospects of inorganic thermal insulation materials will be colorful.

2012.7 Wall material innovation and building energy saving 49

(Finish)

PH-B-L6

Phlizon`s COB series Grow Light emits all the wavelengths of light which can be fully absorbed by the plants to create.

Best full Specturm designed to perfectly match large areas of indooor plants, especially for Medical Plant.

COB + Dual-chip,most efficient spectrum,high PPFD.Two cooling fans with double ball(import from Japan) and big aluminum heat sink to protect the grow lights from high temperature,good cooling,long lifespan.Photosynthesis and promote healthy growth budding and flowering.

1000w/2000w /3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.

Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.

3000w led grow light Features

Indoor grow light

COB series, high power branded CREE COB with high Par value and deeper penetration

VEG/BLOOM and STRONGER switches for each grow stage.

Special spectrum for plant growing to increase the yield.

Building to Harvest: Beneficial for seeding to fruiting stage.

Good quality fans with low noise.

Easy to install by minute

Energy Saving, environmental friendly

3 Years Warranty

Compare led grow light to traditional HPS/MH grow light

WHAT MAKE UP AN EXCELLENT LED GROW LIGHT ?

1.PPFD Value : PPFD is Photosynthetic Photon Flux Density. When you choose a plant light, you should compare the PPFD values of different plant lights. The larger the value, the better the growth of the plant.

2.Actual Power: Because the actual power of the plant light always varies with different conditions, all Amazon sellers use the rated power to describe the power of the product because the rated power is constant. When you pick a LED grow light, the rated power of the plant light is a reference, and more importantly is the actual power.

3.Core Coverage: In addition to the above two, when you choose a plant light, you also need to compare the cover area of different plant lights, of course, the size of the core coverage area. In general, in germination stage, you can hang the plant light higher and the cover area is larger. In flowering stage you can hang the plant light lower and the cover area is smaller because the plant needs more light at this stage. You have to compare different coverage areas to choose the plant light that suits you.

Detailed images of 1000w 2000w 3000w 400w cob led grow light

Applications

Hydroponics, Horticulture, Agriculture and Greenhouse

Locations: Farm, Exhibition, Garden, Home, Urban, Bonsai, and University Lab

Growth of Fruits, Vegetables, Flowers and so on

Seeding, Rooting, Breeding, Flowering and Fruiting period

Packaging and Shipping

3. Customers specifying freight forwarders or negotiable shipping methods!

4. Delivery Time: stock avaiable sample will be delivered immediately ; 3-7 days for trial order; 7- 25 days for batch goods

Suggestions:

1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.

2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.

3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.

4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp

Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.

PHLIZON LOOKING FOR DISTRIBUTOR ALL OVER THE WORLD

If you are interested in, and

1.own several store for agriculture in your local market

2.or in the business of grow light equipment

3.or good relationship with grower or greenhouse owner

To be a distributor, max support will be offered:

1.price support

2.technical support

3.new product support

4.24 hours after-sales service online

PH-B-L6,Optic Cree Cob Grow Light,600W Led Indoor Grow Lights,630W Led Grow Light,Cob 3000W Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com