The owners do not know what they are doing, and they are easy to be fooled. The villas are large in area and small details are easily overlooked. The construction party is not professional and the workmanship is very sloppy. All kinds of problems such as this happen everywhere in the construction. It can be seen that a successful construction is not easy. In this issue, we will come back to the third party who will be more devious and nitpicking. We will go to the villa site to look around and pick the finer places. Look at what a good site should do in terms of details.
Good decoration, start with the details
We have encountered a lot of seemingly normative renovations before, but there are still some problems after completion. This makes some owners feel puzzled. For this reason, the experienced chef told us that in fact this is not a good grasp of the details of the construction, the early period is easy to be covered up, the problem of time has come.
The horizontal baseline on the wall allows the master to accurately determine the size of the construction, not the construction of the gross estimate.
In order to ensure the future use, the strong and weak electric sockets must be separated by a certain distance. The exterior of the cable box is covered with a cover plate, which is beautiful and safe.
The waterproof of the bathroom is in place and the wall is above 1.2 meters. Only in this way can we ensure that there is no leakage.

The hot and cold water pipes are punched separately, and there is a certain distance between the two to prevent future condensation.

Pipe turning is a relatively difficult process. In the figure, the four arcs of the pipe are retracted in a proportional manner.
The ceiling on the second floor of the villa has high requirements for the craftsmanship. It can be seen that the craftsman of the woodworking master is very successful.
Compared to the practice of using gun nails for some construction parties, the construction site uses expansion nails for the construction of ceilings and will be painted with anti-rust paint to ensure safety.
Refined decoration, but also humanized details
Wet cement, muddy ground, dust flying around, hammer hammer everywhere ... ... Some people may say that the site is the case. In reality, the poor construction site is likely to cause damage to the original equipment and finished products.
The plates are most afraid of dampness and bending deformation. In addition, there are many construction tools on the construction site, which can easily cause safety hazards if they are randomly stacked. Therefore, Zhixian has specially designated areas for placing materials and tools to facilitate access and make the scene more secure.
Also pay attention to prevent the finished product from being damaged during construction. In addition to protecting the windowsill and other original products, the wooden box was made to prevent the sliding door from being stepped on.
There are many windows and doors in the villa, but the master has done a full protection for them. For the already installed central air conditioners, the tuyere is also protected. This is the case in every room.
Edit message
Even the best design plan must be implemented through a construction process. We also need to pay more attention to the details of the process. Now that the owners will understand some of the construction standards, they will also visit the site from time to time, but it is difficult to see the doorway, especially for some details, but even less understanding, it is recommended to ask a supervisor or bring knowledgeable friends together Take a walk to see more, so as not to leave the worries behind.
Villa decoration pipe ceiling
Water-Proof Folding Rivets,Water-Proof Tri Fold Rivets,Water-Proof Tri Fold Pop Rivets,Water-Proof Folding Chair Rivets
KD METALS (JINGJIANG) CO.,LTD , https://www.toprivet.com