Specification:Â
Style: | UL Magnetic Contact Door Contact Switch Br-1013 | Item: | BR-1013 |
Magnet: | Rare Earth Magnet | Color: | White, Brown, Grey |
Wire Range Cable: | #20~#24AWG | Loop Type: | Closed |
Reed Form: | N/O | Colsed Gap[Inch(mm)] | 1(25) |
Depature Gap[Inch(mm)] | 1.1 (28) | Maximum InitialContact Resistance(Ohm) | 0.150 |
MaximumContact Rating(W) | 10 | Maximum Switching Voltage(VDC/VAC) | 100 |
Maximum Switching Current(A) | 0.5 | Certificate | CE, UL |
UL Magnetic Contact Door Contact Switch Br-1013
Detailed Images:Dimension (mm):
Product Features:Â
*3/8"diameter press to fit
*Standard 18"#22AWG Leads
*Special leads upon request
*Switch or magnet are available separately
*Resistor,Diode and Supervisory Loop available on request
*Build-in Resistors and Supervisory Loop available on request
*Colors:White,Brown,Grey
Order Information:Â
Part Number |
Loop Type |
Reed Form |
Closed Gap [Inch (mm) ] |
Depature Gap [Inch (mm) ] |
Maximum Initial Contact Resistance (Ohm) |
Maximum Contact Rating (W) |
Maximum Switching Voltage (VDC/VAC) |
Maximum Switching Current (A) |
BR-1013 | Closed | N/O | 1(25) | 1.1(28) | 0.150 | 10 | 100 | 0.5 |
BR-1013XWG | Closed | N/O | 11/4(37) | 1.81(46) | 0.150 | 10 | 100 | 0.5 |
BR-1013DM | Closed | N/O | 3/4(19) | 0.87(22) | 0.150 | 10 | 100 | 0.5 |
BR-1013DMWG | Closed | N/O | 11/4(31) | 1.3(33) | 0.150 | 10 | 100 | 0.5 |
BR-1013A | Open | N/C | 7/8(22) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013C | Closed&Open | SPDT | 7/8(22) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMA | Open | N/C | 5/8(15) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMC | Closed&Open | SPDT | 5/8(15) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMWGA | Open | N/C | 1(25) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMWGC | Closed&Open | SPDT | 1(25) | Â | 0.150 | 3 | 30 | 0.2 |
UL APPROVED:BR-1013,BR-1013XWG,BR-1013DM,BR-1013DMWG
*BR-1013XWG magnetic contact switches shall be installed so that a door or other movable opening cannot be opened more than 2 inches (51mm) without initiating an alarm. Switches exceeding 2 inches can not be installed per UL681-the Standard for installation and Classification of Burglar and Holdup Alarm

Company Information
Specification:Â
Style: | UL Magnetic Contact Door Contact Switch Br-1013 | Item: | BR-1013 |
Magnet: | Rare Earth Magnet | Color: | White, Brown, Grey |
Wire Range Cable: | #20~#24AWG | Loop Type: | Closed |
Reed Form: | N/O | Colsed Gap[Inch(mm)] | 1(25) |
Depature Gap[Inch(mm)] | 1.1 (28) | Maximum InitialContact Resistance(Ohm) | 0.150 |
MaximumContact Rating(W) | 10 | Maximum Switching Voltage(VDC/VAC) | 100 |
Maximum Switching Current(A) | 0.5 | Certificate | CE, UL |
UL Magnetic Contact Door Contact Switch Br-1013
Detailed Images:Dimension (mm):
Product Features:Â
*3/8"diameter press to fit
*Standard 18"#22AWG Leads
*Special leads upon request
*Switch or magnet are available separately
*Resistor,Diode and Supervisory Loop available on request
*Build-in Resistors and Supervisory Loop available on request
*Colors:White,Brown,Grey
Order Information:Â
Part Number |
Loop Type |
Reed Form |
Closed Gap [Inch (mm) ] |
Depature Gap [Inch (mm) ] |
Maximum Initial Contact Resistance (Ohm) |
Maximum Contact Rating (W) |
Maximum Switching Voltage (VDC/VAC) |
Maximum Switching Current (A) |
BR-1013 | Closed | N/O | 1(25) | 1.1(28) | 0.150 | 10 | 100 | 0.5 |
BR-1013XWG | Closed | N/O | 11/4(37) | 1.81(46) | 0.150 | 10 | 100 | 0.5 |
BR-1013DM | Closed | N/O | 3/4(19) | 0.87(22) | 0.150 | 10 | 100 | 0.5 |
BR-1013DMWG | Closed | N/O | 11/4(31) | 1.3(33) | 0.150 | 10 | 100 | 0.5 |
BR-1013A | Open | N/C | 7/8(22) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013C | Closed&Open | SPDT | 7/8(22) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMA | Open | N/C | 5/8(15) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMC | Closed&Open | SPDT | 5/8(15) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMWGA | Open | N/C | 1(25) | Â | 0.150 | 3 | 30 | 0.2 |
BR-1013DMWGC | Closed&Open | SPDT | 1(25) | Â | 0.150 | 3 | 30 | 0.2 |
UL APPROVED:BR-1013,BR-1013XWG,BR-1013DM,BR-1013DMWG
*BR-1013XWG magnetic contact switches shall be installed so that a door or other movable opening cannot be opened more than 2 inches (51mm) without initiating an alarm. Switches exceeding 2 inches can not be installed per UL681-the Standard for installation and Classification of Burglar and Holdup Alarm

Company Information
The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.
Pillow blocks are usually referred to the housings which have a bearing fitted into them & thus the user need not purchase the bearings separately. Pillow blocks are usually mounted in cleaner environments & generally are meant for lesser loads of general industry. These differ from "plummer blocks" which are bearing housings supplied without any bearings & are usually meant for higher load ratings & corrosive industrial environments. However the terms pillow-block & plummer-block are used interchangeably in certain parts of the world.
However fundamental application of both types is the same which is to primarily mount bearings safely enabling their outer ring to be stationary while allowing rotation of the inner ring. The housing is bolted to a foundation through the holes in the base. Bearing housings are either split type or unsplit type. Split type housings are usually two piece housings where the cap and base can be detached. While certain series are one single piece housings. Various seals are provided to prevent dust and other contaminants from entering the housing. Thus the housing provides a clean environment for the expensive bearings to freely rotate hence increasing their performance and duty cycle.
Bearing housings are usually made of grey cast iron. However various different grades of metals can be used to manufacture the same.
Ucf Pillow Bearing,Ucf Pillow Block Bearing,Ucf 207 Flange Bearing,Flange Mounted Pillow Block Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com