Back to the South Tianli, prevent moisture and timely remedy to avoid injury

When winter comes to spring, it is warm and cold. When people wake up, they find that the world outside the window is caught in a misty sea. This kind of weather is called “Back to the South”. Back to the South is the phenomenon of the return of the weather, which usually occurs in the second and third month of spring. The tiled walls and the ground of the home condense a layer of water droplets. It is easy to slip and do not say, and it is easy to make the tiles damp. How to prevent the tiles from getting damp? Following Xiaobian together to understand it.

First, one by one solution ceramic tile problem

1, surface condensate water slips easily

When there is water on the surface of the tiles, there will be condensation on the surface of the tiles. People walking on the ground will easily slip and get injured. Put salt in warm water and wipe the wall. Magnesium chloride and calcium chloride in the salt can absorb water and keep the wall dry.

2, mildew caused by wet weather

The condensation of water on the surface of the tile has been wiped off, it will easily lead to moldy tiles, resulting in stubborn dirt and musty. Mix the white vinegar in the water and spray it on the moldy tile. After it is dried, rinse it with water and air dry it.

3, tiles loose off

If the tile seam is not done well, moisture penetrates into the interior of the tile through the gap, so that the adhesive and putty are damp, and the tile will loosen and fall off. So tile seams must be completely filled with products that have a waterproof function.

4, brick fractures

Some ceramic tiles with high water absorption rate will be damaged by water vapor after damp, and they will break easily. Be sure to test the water absorption of the tiles at the time of purchase. Tiles with low water absorption can be waterproof and moisture resistant.

Tile Tile Tile Tiles

1 2 Next> Total 2 Page
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

Pre-rinse Faucet

Bestware Pre-rinse Faucet brings the fine design and high technology together in all areas of the product process beyond Pull Out Faucet, Commercial Faucet and Commercial Kitchen Faucet. With extensive range of components, we can offer a large selection of both standard Kitchen Faucet and custom Basin Tap units as well as flexible combination. Stainless steel is 100% recyclable and is comprised of over 60% recycled material, Bestware faucets are the perfect solution in the commercial and industry for better water quality and the circumvention of the development of deleterious substances and bacteria. No plating, no oxidizing, no rust, lead free.

Pre-Rinse Faucet,Pre Rinse Kitchen Faucet,Pre Rinse Tap,Pre Rinse Unit

Bestware Hardware Production Co., Ltd. , https://www.bestwaremfg.com

Posted on