![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Japan die-casting aluminum alloy chemical composition table
JIS grade
ISO brand
Cu
Si
Mg
Zn
Fe
Mn
Ni
Sn
Pb
Ti
Al
ADC1
1.0 or less
11.0-13.0
0.3 or less
0.5 or less
1.3 following
0.3 or less
0.5 or less
Less than 0.1
margin
ADC1C
A1-Sil2CuFe
1.2 following
11.0-13.5
0.3 or less
0.5 or less
1.3 following
0.5 or less
Less than 0.30
Less than 0.1
0.20 or less
0.2 or less
margin
ADC2
A1-Si12Fe
0.10 or less
11.0-13.5
0.10 or less
Less than 0.1
1.3 following
0.5 or less
Less than 0.1
0.05 or less
Less than 0.1
0.2 or less
margin
ADC3
0.6 or less
9.0-10.0
0.4-0.6
0.5 or less
1.3 following
0.3 or less
0.5 or less
Less than 0.1
margin
ADC5
0.2 or less
0.3 or less
4.0-8.5
Less than 0.1
1.8 or less
0.3 or less
Less than 0.1
Less than 0.1
margin
ADC6
Less than 0.1
1.0 or less
2.5-4.0
0.4 or less
0.8 or less
0.4-0.6
Less than 0.1
Less than 0.1
margin
ADC7
A1-Si5Fe
0.10 or less
4.5-6.0
Less than 0.1
Less than 0.1
1.3 following
0.5 or less
Less than 0.1
Less than 0.1
Less than 0.1
0.20 or less
margin
ADC8
A1-Si6Cu4Fe
3.0-5.0
5.0-7.0
0.3 or less
2.0 or less
1.3 following
0.2-0.6
0.3 or less
Less than 0.1
0.2 or less
0.2 or less
margin
ADC10
2.0-4.0
7.5-9.5
0.3 or less
1.0 or less
1.3 following
0.5 or less
0.5 or less
0.2 or less
margin
ADC10Z
2.0-4.0
7.5-9.5
0.3 or less
3.0 or less
1.3 following
0.5 or less
0.5 or less
0.2 or less
margin
ADC11
A1-Si8Cu3Fe
2.5-4.0
7.5-9.5
0.3 or less
1.2 following
1.3 following
0.6 or less
0.5 or less
0.2 or less
0.3 or less
0.2 or less
margin
ADC12
1.5-3.5
9.6-12.0
0.3 or less
1.0 or less
1.3 following
0.5 or less
0.5 or less
0.2 or less
margin
ADC12Z
1.5-3.5
9.6-12.0
0.3 or less
3.0 or less
1.3 following
0.5 or less
0.5 or less
0.2 or less
margin
Japan die-cast aluminum alloy mechanical performance table
Grade
Tensile test
Hardness test
Tensile strength MPa
Endurance MPa
Elongation %
HB
HRB
average value
σ
ASTM
average value
σ
ASTM
average value
σ
ASTM
average value
σ
ASTM
average value
σ
ADC1
250
46
290
172
twenty two
130
1.7
0.6
3.5
71.2
3.5
72
36.2
5.5
ADC3
279
48
320
179
35
170
2.7
1.0
3.5
71.4
1.8
76
36.7
2.2
ADC5
(213)
65
310
(145)
26
190
5.0
(66.4)
2.4
74
(30.1)
3.7
ADC6
266
61
280
172
twenty three
64
3.2
10.0
64.7
2.3
67
27.3
3.9
ADC10
241
34
320
157
18
160
1.5
0.5
3.5
73.6
2.4
83
39.4
3.0
ADC12
228
41
310
154
14
150
1.4
0.8
3.5
74.1
1.5
86
40.0
1.8
ADC14
193
28
320
188
31
250
0.5
0.1
<1
76.8
1.7
108
43.1
2.1
Whether it is classic or contemporary, polyurethane decorative Carved Cornice Mouldings encompass a great selection of period correct designs, patterns and sizes for a wide variety of applications. Our decorative Carved Corner Mouldings are used to decorate a ceiling in many creative ways adding an architectural focal point to any room with style and beauty. Our Carved Cornice Mouldings are individually molded showing extreme care for its crisp lines which provides an elegant detail. They are light weight, strong and easy to install using standard woodworking tools. Our Carved Cornice Mouldings are factory primed and ready to be painted with any high quality paint.
PU Decorative Mouldings, PU Cornices, Crown Molding, Carved Cornice Mouldings, Cornice Corner Mouldings, which are available in numerous designs to suit all tastes and styles and ensure a beautiful transition from wall to ceiling.
We have Carved Cornice Mouldings about 150 different designs, big size of Carved Cornice Mouldings are widely use to decoratie on the ceiling of big and high rooms, we develop new Carved Cornice Mouldings every year, our Carved Cornice Mouldings may be satified with all of your requirements.
Main characters of Cornice Mouldings :
1. Low cost: the surface painting is finished and installation time is very short, can be planed, sawed, nailed and glued by yourself, 80% cost saved than using wood and concrete.
2. Light weight: good resilience and tenacity, light and hard.
3. Entirely: classic, elegant and uniform.
4. Fire-proof: reach the standard of no combustion, uncombustion supporting and unburning.
5. Water-proof: no moisture absorbing, water permeation and mildew arising.
6. Anti-erosion: resist acid and alkali.
7. Environment protection: using polyester as raw material to avoid lumbering.
Sites suitable: House, Restaurant, Hotel, Salon, Club, Shop etc.
Carved Cornice Mouldings,Cornice Mouldings,Crown Mouldings,Polyurethane Carved Cornice Mouldings,Pu Cornice,Foam Crown Mouldings,Decorative Cornice Mouldings
Suntronic New Materials Technology Co., Ltd. , https://www.dsmdecor.com