![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Laying floor tiles is an essential process for many home renovations. Flooring tiles are a technical activity! It is also a necessary job for a plasterer. Laying up a lot of problems that need attention, good technology can make tiles more taste, small series under the following tools to introduce floor tiles and how laying floor tiles.
The commonly used tools for laying floor tiles are:
1. Shovel: It is used to mix and stir the mixing cement and sand.
2, ash bucket: used to hold the tempered cement mortar. 
3, washbasin or bucket: used to fill the configuration of cement mortar or wet base layer treatment, such as paving tiles need to be soaked in water also need to prepare a large basin to soak the tiles.
4. Spirit level and ruler: The level meter is used to determine the height of the decorative layer on the tile, and the horizontal ruler is used to verify the flatness of the tile.
5. Rubber Hammer: The compaction of the compacted and hammer-pressed tiles used to hammer the dry ash layer.
6. Nylon thread or cotton thread: It is used for the pull wire treatment before laying and keeps the straightness of the tile laying. 
7, white cloth: used to wrap the rubber hammer to prevent the black blot of the rubber hammer to contaminate the brick surface.
8. Plastering knife and trowel: It is used to take cement mortar when laying tiles.
9, marble machine: used to cut tiles.
10, wipes or cotton yarn: used to wipe out the brick mortar surface of the mortar. 
Floor tile step/method
1, according to the design drawings or design requirements, find the floor tiles color, pattern and other test spelling number. Pick out defective bricks so that you can prepare for the work ahead.
2. After the floor tiles arrive at the venue, they need to be categorized. At the same time, remember to place them in a safe place so as not to damage them.
3, before laying the floor tiles, soaking, so as to avoid the absorption of tiles caused by the absorption of moisture in the cement and a tight cracking.
4, floor tiles need to use a spoon or water pipes, the ground base to wet with water to reduce dust. It also allows the ground to absorb part of the water without generating water shortages. 
5. Next, it is the stirring of the cement cushion. The volume ratio of the cement sand laid on the floor tiles is preferably about 1:5, and the water spray is evenly mixed, and the thickness should be about 3cm; the bonding layer and the floor tile should be paved at the same time, and cement slurry or dry mud sprinkling water should be used for bonding when paving.
6, after a good touch of cement oil, it should be tapped slowly with a plastic hammer to reach the standard level can be. Remember, cement oil must be polished, otherwise it will be easy to empty the floor in the future. The surface of the floor tile surface is cleaned, smooth and firm with a water rag within half an hour after the surface of the floor tile is finished.
The above is about what are the tools for paving the floor tiles and what are the steps for paving floor tiles. Let's give you a reference! If you have more related issues, welcome to continue to pay attention to this site, and later will show more exciting content for everyone.
Flooring tools
Steccawood Rectangle,Steccawood Curved Joinery,Half Round Steccawood Around,Prefinished Decorative Battens Create
PRO CABINET SOLUTION PTY LTD , https://www.pcscabinet.com.au