(reproduced) concrete equipment double shaft mixer, mixer model

Huayi Concrete Equipment Double-Axis Mixer and Mixer Model The double-shaft mixer is mainly used for mixing various powder materials to produce various powdery mixing materials. The aggregate can be wet fly ash, calcium carbide mud, phosphogypsum, sand stone, slag, etc. It is mainly used as a supporting host for various standard bricks, lime sand bricks and other production lines. It is one of the important equipments in the production process of autoclaved fly ash bricks and lime sand bricks. Henan Huayi is a large-scale equipment manufacturer's main equipment aerated concrete equipment, aerated brick equipment, light brick equipment, aerated concrete block equipment and other production line equipment, today this article will be detailed in the Huayi concrete equipment double The shaft mixer is described in detail.



Huayi concrete equipment double-shaft mixer adopts two sets of spiral blades for agitation. It has high mixing efficiency and small floor space. The spiral blades are made of high wear-resistant special alloy or composite ceramic and have long service life. The twin-shaft mixer is driven by a cycloidal pinwheel reducer, which has stable rotation and low noise. The twin-shaft mixer feeds from the top and discharges at the bottom, which is reasonable in structure. The sealing between the joint surfaces of the twin-shaft mixer is strict and the operation is stable. The two-axis mixer is equipped with a humidifying water spray system to ensure uniform water spray and adjust the water supply to meet the needs. The dust humidifying mixer uses a hand pressure oil pump to centrally supply four transmission bearing greases, and the double shaft mixer (dust humidifier) ​​facilitates the use and maintenance of the equipment, and has the advantages of high efficiency and time saving.
The structure and working principle of the twin-shaft mixer The two-axis mixer is integrally fixed on a bracket. When the machine is working, the dust in the silo is evenly input into the main unit by the impeller feeder, and the material is driven into the belt by the high-speed running blades. In the ratcheting mixing drum, the ash and the limited amount of water are forcibly mixed by the high-speed running ratchet, and in the process of stirring and dispersing, the standard mixture of the predetermined humidity is pushed to the discharging port to solve the secondary dusting. the goal of. Moreover, the blades and the stirring rods are all made of special wear-resistant anti-corrosion materials, which greatly improves the service life.
Precautions for use of the two-axis mixer 1. When starting the main machine, the motor must reach the rated speed and then the clutch is slowly combined. Do not use excessive force, damage the machine parts, and reduce the life of the machine.
2. Before the test run, add gasoline or kerosene, wash the tank, the parts inside the oil pool, and then prevent it. Add the gear oil and put it in.
3. Before the test run, climb the tape wheel by hand to make the spindle idle for several weeks, and then start the obstacles and abnormal phenomena.
Daily maintenance of the two-axis dust humidifying mixer The two-axis mixer equipment should be inspected frequently during operation. If abnormal noise, shock, vibration, and temperature rise sharply, it should be checked immediately, and the operation can be continued after the fault is eliminated.
1. The maintenance is carried out once a year; the maintenance is carried out once a month; the small maintenance is carried out every four hours; the mechanical sliding parts of the dual-axis dust humidifier (the frictional oil of the friction plate) must be added with grease. To ensure the flexibility of operation.
2. It is necessary for each user to establish strict operating procedures and maintenance systems, and to configure professional technicians with higher service levels to ensure efficient operation of the equipment to achieve satisfactory economic results.
3. Seriously implement the large, medium and small maintenance system:
a large maintenance and maintenance of all the parts, cleaning, inspection, repair or replacement of damaged parts, fully restore the equipment. b Small maintenance check to adjust the wrong part, add lubricant (fat). c. All maintenance and repairs are checked and the lubricant (fat) is replaced.


Phone: 0391-3705666
Fax: 0391-3705003
Mobile: 13673607707
E-mail:
Address: Intersection of Zhongfu Road and Zhongye Street, Wen County Industrial Cluster, Jiaozuo City, Henan Province

High Velocity Powder-Actuated Tool is used for normal concrete not harder than C40. The nail initial velocity is very high as there is no piston but high pressure gas to push it. 

High Velocity Powder-Actuated Tool

High Velocity Powder-Actuated Tool ,Powder Actuated Tool,Powder Actuated Fastener Tools,Powder-Actuated Insulation Tool

Yibin Heheng Technology Co.,Ltd , http://www.actuated.nl