Working principle and technical data of belt sludge dewatering machine

Structure and working principle of belt sludge dewatering machine The sludge is first mixed with flocculant and flocculated into a mass, and then subjected to gravity dewatering, wedge pressure dehydration, low pressure dehydration, medium pressure dehydration and high pressure dehydration to gradually make the sludge moisture Reduced, and finally discharged into solids. This is the working principle of the “new ring” belt sludge dewatering machine, which is designed according to the dewatering characteristics of the sludge.
principle:
The well-conditioned sludge enters the gravity dewatering zone of the belt sludge dewatering machine. Under the joint action of the cloth mechanism and the dredging mechanism, the filter belt moves forward and removes the void water of the sludge under the action of gravity.
When the sludge runs along the filter belt to the end of the gravity dewatering zone, it enters the wedge-shaped dewatering zone of the belt sludge dewatering machine through the turning mechanism. In the wedge-shaped dewatering zone, the sludge is pre-stressed by the wedge pressure formed by the two filter belts, and further desorbed. Remove the void water from the sludge.
The gravity dewatering and wedge pressure dewatering sludge enters the low pressure zone and the high pressure zone to press and dewater. The pressure zone is composed of a low pressure porous roller and a high pressure roller. The filter belt is wrapped around the sludge and wound on the surface of the pressure roller, because the diameter of the pressure roller is large. The arrangement is small, so the pressure exerted by the filter belt on the sludge is gradually increased from small to large, which is consistent with the dewatering characteristics of the sludge.
The filter cake which has been dehydrated by pressing is solidified by a scraper and discharged.
The whole sludge dewatering machine drives the two filter belts to continuously move in addition to the frame 1 which acts as a skeleton. The tensioning device is responsible for tensioning the filter belt to form a pressing force on the sludge; the cleaning device is responsible for cleaning the filter belt. The residual slag ensures the high efficiency of the filter belt; the automatic correcting device is responsible for ensuring that the filter belt automatically corrects the axial offset during operation; the filtrate tray is used to collect the filtrate produced by press dewatering; and the roller system includes the pressure roller and the drive. The roller, the tension roller, the deflection roller, the discharge roller, and the guide roller support the filter belt and allow the filter belt to repeatedly repeat various functions.

The article stems from: http://?id=154

Manhole cover, used to cover the road or deep in the house to prevent people or objects from falling. According to the material can be divided into metal covers, high-strength fiber cement concrete covers, resin covers and so on. Has round type,square type or as demand. Can be used for garden, sidewalks, roads, docks, alleys and so on.

Product Information: 

Name: Manhole cover & Grating

Material: Ductile iron GGG50/7, Gray Iron

Standard: EN124/1433/1563

Class: A15,B125,C250,D400,E600,F900

Shape: Round, Square, Rectangle, Triangle and other shape as demand

Size: From 300(300X300) to(1000) 1000*1000 or custom size

Paint: Bituminous black

Advantage: Longevity corrosion resistance, Excellent anti-pressure

Molding: Depends on the design

Process: Drawing-mould making-raw casting-sand blasting-rough machining-surface treatment-product inspection

Application:motor vehicle Road, municipal administration, living quarters communications, electricity and water supply works

Manhole Covers

Manhole Covers,Cast Iron Manhole Cover,Ductile Manhole Cover,Ductile Iron Manhole Cover

HEBEI ZIFENG NEW ENERGY TECHNOLOGY CO.,LTD. , http://www.zifengpipeline.com