The water outlet plugging of the shower is often caused by the accumulation of impurities in the screen cover. After using the shower for a period of time, it is likely to accumulate some scale, resulting in poor water flow or water flow disorder. Scale cleaning is an inevitable task of showers. Depending on the function of the shower itself, it is mainly divided into the following categories:
1. Manual cleaning: Remove the net cover or other parts that absorb scale from the shower head, and then clean it with a brush and then return to the original place. Some brands of showers are equipped with a special shower head opening tool for consumer convenience. Dip the shower into a 50/50 solution of white vinegar and water for one hour. White vinegar can easily remove mineral deposits.
2, hand-washing: the water hole of this type of shower is designed with rubber particles. The rubber material is soft and comfortable to touch, and it is not easy to scale. It is easy to clean. You can easily smash the scale by simply rubbing the rubber particles with your fingers. ,pop up. This type of cleaning makes good use of the properties of the material and is a popular cleaning method on the market today.
3. Automatic cleaning: In order to avoid the blockage of the water outlet due to poor water quality, many showers have the function of automatically removing scale. Due to the special structure of a certain type of shower, the scale will be automatically cleaned out during use. For example, some shower heads have a cleaning needle inside. When the water is converted, the cleaning needle will automatically pop out to bring out the scale.
What needs to be reminded here is that even if your shower has automatic cleaning function, it is best to open the shower head after a long time of use, for a thorough manual cleaning, giving your shower the most meticulous Conservation.
Classification of showers
There are three main types of showers, namely hand showers, overhead showers and side showers.
The functionality of the shower is mainly reflected in the way the water is discharged. The more common modes of effluent function are: general type, which is the shower water required for bathing, suitable for simple and quick showers; massage type, which means strong and powerful watering, intermittent pouring, which can stimulate every acupuncture point of the body; The water flow is concentrated into a water column, which makes the skin feel slightly itch. This kind of bathing method can stimulate and clear the mind very well; the strong bundle of water is strong and can produce a misty effect through the collision between the water streams. Can increase the fun of bathing. Installation note: height and water pressure
The installation height of the shower can be divided into two types according to the type of shower: according to the relevant regulations, the center of the dark water outlet of the concealed shower wall should be 2.1 meters from the ground, and the center of the shower switch should be 1.1 meters from the ground. The lifting rod shower is generally defined by the shower surface, and the distance is preferably 2 meters. It should be noted that these data are only average data, and should be adjusted according to the user's height when actually installing.
The wall-mounted shower switch is buried in the left and right cold, and the center spacing should be 150cm. The wall of the wall should be level with the tile surface. The inner buried pipe should be perpendicular to the wall. After the shower is installed, it should be at a 90 degree angle to the wall. In addition, water pressure adjustment is also a key: under normal circumstances, the water pressure within 1.5 kg is most suitable for shower use, the water pressure is too large to cause the shower violent, the water pressure too small shower can not be used normally.
Polishing Liquid Compound,Car Polishing Compound,Meguiars Compound And Polish,Buffing Compound For Cars
Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com