5 ways to install LED lights

Step / method

11 four-line LED lights with a total of four wires, three rows of lights (note that not four rows of lights ~ ~), each row of 1 meter 24 lights, 24 * 3 = 72. Since the power of each lamp bead is 0.05W, the power of the 72-bead LED lamp strip is: 72*0.05=3.6W.

The 22-line LED lamp has a bandwidth of about 22mm, a thickness of about 8mm, and a weight of about 0.25kg/m (4m-kg).

33 Each LED light strip must be equipped with a special plug (plug with transformer); when connecting, it is necessary to remove the clear plastic cover, and then cover the test light. Can not be directly connected with a cover, so easy to short circuit!

44 There is a "hinged" mark per meter, which can only be cut at the mark. If the mark is wrong or the cut will cause one meter to be off! Some will be biased because of the mark. It is best to look carefully at the mark before cutting. Position, according to the local cut off the center can not be connected. You can see it with care. Technical support: Guangzhou Qianbo Network, website construction company.

When the 55LED light strip device is installed, it is usually placed in the light trough, and it can be straightened. It can also be fixed with a string or a thin wire. If you need to install the exterior or the vertical, you need to buy the clip and the tail plug. The original clamp is fully illuminating. It is best to put a waterproof glass glue on the tail plug and the plug after the installation, so that the waterproof function is better.

Sink Siphon

Sink Siphon,Kitchen Siphon,Bathroom Sink Siphon,Sink Double Bowl Siphon

Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com