Maintenance and maintenance of color steel tile machine equipment

Color steel tile machine equipment maintenance and maintenance Do not understand the structure and performance of the machine and operating procedures should not start the machine. It is forbidden to work beyond the minimum closing height, that is, the minimum distance of 290mm from the bottom surface of the upper sliding box to the working surface requires the height of the upper and lower molds after clamping, plus the thickness of the upper and lower pads plus the thickness of the blank.
The maintenance and maintenance of color steel tile machine should pay attention to the following points:

1. Do not start the machine without knowing the structure and performance of the unit and the operating procedures.

2. It is forbidden to work beyond the minimum closing height, that is, the minimum distance from the bottom surface of the upper sliding box to the working surface is 290mm. The height of the upper and lower molds after clamping is added. The thickness of the upper and lower pads plus the thickness of the blank is not allowed to exceed 290mm. The mold should be designed according to this requirement to avoid machine accidents.

3. Always observe and observe the height of the lubricant in the cabinet and on both sides of the body. The equipment should be wiped frequently, kept clean, and no muddy water.
The internal structure of each equipment produced by Shun Cheong Tong is mainly composed of left and right body, bottom link, top cover, sliding seat, hexagonal wheel, pulley, gear mechanism, sheave mechanism, cam mechanism and lubrication pump. , oil circuit system, electronic control part and so on. The upper die stamping process of the machine: the motor drives the input shaft through the pulley, drives the upper shaft through the pinion gear and the large gear, and drives the sliding seat with the upper mold to move up and down through a set of cam mechanism to realize the pressing tile. The indexing of the table is carried out by the gear set mounted on the upper end of the shaft, the drive pin gear, and the groove wheel mounted on the hexagonal wheel shaft to realize the indexing positioning, and one end is installed at each end of the upper shaft. The return cam, which is mounted on the same shaft and conjugated to the pressing cam, realizes precise positioning of the lower mold in the working position by the positioning rod and the positioning disc. Lubrication pumps are installed in the left and right sides of the cabinet, and the oil is delivered to the frictional moving parts when the machine is working.
This article is only a brief description of the maintenance of color steel tile equipment, this is just a personal glimpse, please visit **http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Fiberglass Fabric

Fiberglass fabric has gained significant popularity in various industries due to its exceptional strength, durability, and versatility. This fabric is made from woven strands of fiberglass, resulting in a lightweight yet robust material. With its high tensile strength and resistance to heat, chemicals, and abrasion, fiberglass fabric finds applications in a wide range of fields. It is commonly used in the construction industry for reinforcing concrete structures, as well as in the manufacturing of insulation materials, protective clothing, and composite materials. The flexibility and moldability of fiberglass fabric make it an ideal choice for creating custom shapes and structures, making it a valuable asset in numerous industrial and commercial applications.

Fiberglass Fabric,Glass fibers,Reinforcement

Jinwu Glass Fiber Co., Ltd , https://www.jinwuwindows.com