Marble renovation process is determined by the degree of damage

In many ordinary life, there will be mixed work in many decoration projects. A large number of construction workers will wear materials and wear or corrode the appearance of marble. In serious cases, large areas of marble will be stained, which will affect the original luster. Some people choose to re-paved stone, and some choose to renovate, which one is better?

In the above phenomenon, we only need a relatively simple refurbishment and polishing process, which will give us a new effect, which is more economical than re-paving stone. So how do we go to renovate the marble?

First of all, we need to determine the degree of damage to the marble, and determine the refurbishment process according to different degrees of damage. According to the corresponding refurbishment process, the marble renovation has three types: mild renovation, medium renovation and deep renovation.

First, the marble is gently refurbished: If the appearance of the stone is slightly scratched, we can use 800# diamond water-grinding piece + clean water for 10 minutes, which can be refurbished by a mild refurbishment process. Note: If there is old wax on the ground, wax first, add water in the process of grinding to keep the ground moist, and use the water suction machine to absorb the sewage to prevent the sewage from polluting the ground for the second time. Then change the 1500#.3000#PAOG polishing sheet and the diamond water-grinding sheet, and polish them one by one by the above method.

Second, the marble is moderately refurbished, the appearance of the stone is tarnished, and it can be refurbished by medium refurbishment. Using 200#, 400#, 800#, 1500#, 3000# polished pieces, it is impossible to reflect the object but not too deep scratches. . The diamond water-milling pieces are polished one by one, the grinding method, and the precautions are as described above.

Third, the marble is deeply refurbished. When the stone shows holes, weathering and severe corrosion, the process of deep renovation can be adopted. Before refurbishment, completely tarnished and deeply scratched, first repair the hole by the following method: first clean the dirt in the hole, then dry the stone, and use the epoxy according to the color and reflective characteristics of the original stone. Resin or unsaturated resin glue, after toning and then repairing, using weighting machine, matching new disk and 50#, 150#, 200#, 400#, 800#, 1500#, 3000# polishing piece diamond grinding The pieces are polished one by one. Note that the item is the same as “Marble Light Renovation”.

Glass Table Lamp

Glass Table Lamp,Glass Base Table Lamp,Stained Glass Table Lamp,Green Glass Table Lamp

Zhongshan Seekyo Lighting CO., Ltd. , https://www.seekyomodernlamp.com