What kind of machine materials should be prepared for the basement plugging?

Want to do the basement project plugging, no experience how to do? See this article you are blessed, this article from the construction point of view, from the beginning to the end tell you to do the engineering plugging, which tools, products and materials need to be prepared?
[Demes waterproof plugging] Want to do the basement project plugging, no experience how to do? See this article you are blessed, this article from the construction point of view, from the beginning to the end telling you to do the project plugging, you need to prepare What tools, products and materials?

After judging the leaking point to clean the base surface, the first thing is to open the eye and bury the needle. The tools and accessories involved are as follows:



Electric drill







Drill bit (determined according to the size of the water stop needle)


The second step is to connect the high pressure grouting machine.
About high-pressure grouting machines, there are a variety of styles and models to choose from, there are single-liquid type and two-liquid type, there are common type and load relief valve type (DH-812), and there is a luxury atmosphere local gold (DH-800). There is also a high-quality and restrained green (DH-999). And each set of high-pressure grouting machine is armed to the head of the butter, and it can be used for purchase.

The third step: plugging the material.
How to distinguish between hydrophilic or hydrophobic PU grouting and leak-proof rubber plugging materials, the simplest way to judge is: if the water flow needs to be blocked, use hydrophilic type, and then react with water again. If it is only a slight leak, use a hydrophobic material. After the products are ready, you can build them!

Step 4: Other products and wearing parts.
In addition to the water stop needle, the standing fittings also have a butter head (the head of the butter is used to connect the on-off valve and the water stop needle), and the position of the butter head is indicated in the structural drawing below.
Acetone is used to clean used machines to prevent clogging of important parts. If the cleaning is not complete, it is very easy to block the pump, high pressure pipe, etc. The machine will not work properly next time.

More graphic details, please add


Customer service trumpet
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Aluminum Roller Shutter Door

Material characteristic: Using high quality aluminum extruded shutter profiles, multi-layer painting or film layer surface have excellent scratch resistance function, not decay, wearable and anti-collision.Nice white profiles, accepting mass customization according to users requirements(light gray, brown, cream, wood, fused, sand color and light sand color ,etc.)

Integrated protection and decorative features together,the best replacement of traditional theft network security replacement; flexible way open ways, supporting hand control, group control. The door could be your safe rescue channel when in emergency.

When in state of close, support ventilation and lighting, this contribute to enhance the cooling and heating effect of air conditioner, ensure safety, comfortable, energy saving, noise isolation and aesthetics.

Aluminum Roller Shutter Door,Commercial Aluminum Roller Shutter Door,Aluminum Alloy Roller Shutter Door,Color Steel Aluminum Roller Shutter Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com