![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The aluminum buckle plate is based on aluminum alloy plate, which is obtained through cutting, shearing and molding. The ceiling of the aluminum buckle plate is processed by the aluminum buckle plate. After the decoration of the ceiling of the aluminum buckle plate, how does the industry mainly accept the project? The owner of the aluminum buckle ceiling is very concerned about this. This article Xiao Bian told everyone that the aluminum buckle plate ceiling installation acceptance issues need to pay attention to.
After the installation of the aluminum buckle plate ceiling installation needs to see 9 major standards:
[Standard 1]: The types, specifications and colors of the materials used in the ceiling construction of the aluminum buckle plate shall be in accordance with the design requirements.
[Standard 2]: All kinds of keel ceilings must be firmly fixed. After fixing, a full inspection and leveling should be performed and the installation position must be checked.
[Standard 3]: The specifications of the wood used for the ceiling wood frame of the aluminum buckle plate shall be in accordance with the design requirements. Each wooden block shall be glued and then fixed with nails. The side contacting the cover plate must be planed.
[Standard 4]: The ceiling wood frame structure should meet the fire protection requirements.
[Standard 5]: Each type of cover panel should not have defects such as air bubbles, peeling, cracks, missing corners, dirt, and pattern defects. The surface should be flat, the edges should be neat, and the color should be uniform.
[Standard 6]: The hole spacing of perforated plates should be arranged neatly, and plywood and wood fiberboard should not be degummed, discolored, and decayed.
[Standard 7]: Plywood and medium density fiberboard, if fixed with nails, with a nail pitch of 80-100mm and a nail length of 25-35mm, the cap should be flattened and entered the board surface 0.5-1mm. The nail hole is smoothed with an oily putty. .
[Standard 8]: When the veneer surface is painted varnish, the wood grain and color of the adjacent plate surface should be similar.
[Standard 9]: When the cover panel is to be pasted or brushed, the joints should be brushed with white latex and fine cotton cloth, with at least 5mm overlapping on both sides of the seam.
Tips: If you need to know more about the aluminum buckle ceiling inspection, please pay attention to the information on this site to understand.
More exciting recommendations:
Corridor ceiling decoration renderings
Restaurant ceiling decoration renderings appreciation
Kitchen ceiling decoration renderings appreciation
Inclined attic ceiling decoration effect
Knowledge of building materials Aluminium buckle ceiling ceiling effect map decoration design restaurant renderings paint kitchen renderings kitchen ceiling decoration renderings corridor ceiling decoration renderings decoration ceiling renderings ceiling decoration renderings restaurant ceiling decoration renderings corridor decoration renderings sloped roof loft decoration effect Figure kitchen decoration renderings to appreciate the attic decoration renderings Restaurant ceiling restaurant ceiling renderings
Suzhou Newstar Hardware Co.,Ltd, is a professional China Manufacturer in various kinds of Tool Set, including Hand Tool Set, power tool set, electric screwdriver set, power tool kits and garden tool set. Located in Zhangjiagang, Jiangsu Province, we enjoy convenient traffic to Shanghai and Ningbo Port. With years experience in this industry, we have stable production capacity, and continue to innovate and develop, and adhere to the principle of good faith and quality.
Power Tool Set,Electric Screwdriver Set,Power Tool Kits,Cheap Power Tool Sets
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.sjnewstarhardware.com