Basic knowledge of purchasing lamps

Basic knowledge of purchasing lamps :

Purchase on demand

1. The living room is a place for people to pick up guests. It is required to create a warm and warm atmosphere. Therefore, it is advisable to use a dignified and bright chandelier or ceiling lamp in the living room. If the room is tall, it is advisable to use an incandescent chandelier or a large circular chandelier to make the living room appear transparent, but it is not advisable to use all the chandeliers with a downward light distribution, but the upper space should also have a certain brightness to reduce the upper and lower sides. The difference in spatial brightness. The shape and color of the luminaire should be coordinated with the furnishings of the living room.

2, the study lighting should be bright and soft as the principle, the choice of incandescent light bulbs is more suitable. The desk lamp of the desk should be adapted to the nature of the work and the learning needs. It is advisable to use a direct table lamp with a reflector and a lower opening. The light source is commonly used for incandescent lamps and fluorescent lamps.

3, the bedroom can be mixed with several kinds of lights, soft, decorative lamps can enhance the warm and elegant atmosphere of the bedroom.

4, the restaurant's dining table needs warm and bright effect, it is best to use the downward direct illumination of the lamp, the position of the lamp is generally directly above the dining table. Warm wall lights can be placed on the wall near the dining table, which will make the atmosphere more welcoming.

5, the kitchen, bathroom and aisle generally use ceiling lamps, because these places need to be less bright, and the water vapor is large, dust, and the ceiling lamp is easy to clean, and it is good for protecting the bulb. The lamps in the kitchen should be easy to scrub and corrosion resistant. The bathroom should be equipped with lamps that are resistant to moisture and rust.

Safety first

When selecting a luminaire, look at the quality first, check the warranty book, and complete the certificate. The most expensive is not necessarily the best, but it is not good to be too cheap. The quality of many cheap lamps is not enough, and there are always hidden dangers. Once a fire breaks out, the consequences are unimaginable. So how do you buy a safe fixture?

1. Pay attention to protection against electric shock. The electric shock caused by the luminaire is generally caused by the electric shock protection measures such as the lamp holder that does not meet the requirements or the live parts of the lamp without the cover. Normally, the bulb is screwed in during use, and the person has to touch the live parts after the lamp is powered.

2, pay attention to the cross-sectional area of ​​the wire used in the lamp: when buying, you can look at the mark printed on the insulation layer outside the wire on the lamp, and specify the minimum cross-sectional area of ​​the wire used on the lamp is 0.5mm/square. Some manufacturers want to reduce the cost. The cross-sectional area of ​​the wire used in the product is only 0.2mm/square. Under abnormal conditions, the wire will be burnt, and the insulation layer will be short-circuited after being burned out, posing a danger.

3, pay attention to the accessories of the lamp: If the electronic ballast is used in the lamp, you should purchase the lamp with the abnormal protection electronic ballast. For example, the inductor ballast is used in the luminaire. Try to use a higher tw value (such as tw130). Especially when the heat dissipation condition of the lamp is poor, you should pay attention to this point. Tw is the rated maximum working temperature of the ballast coil. At this temperature, the ballast has a life of 10 years of continuous operation.

Gu Quan

That is to say, in the choice of lighting, pay attention to the style of the residence.

The color, shape and style of the lamps must be commensurate with the style of interior decoration and furniture. The flashy lighting is not a icing on the cake, but a superfluous addition. In addition to matching the color tone of the interior, the choice of the color of the luminaire can of course be purchased according to personal preference. The size, type and number of lamps should be coordinated with the size of the room, the total area, and the height of the room.

Finally, the purchase of lighting should be determined according to their own economic conditions, and do what they can.

Steel Screw Machined Parts

Steel Screw Machined Parts,Stainless Steel Screw Machine Parts,Custom Screw Machined Parts,Stainless Steel Screw Machined Parts

Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com

Posted on