Careless winter floor cleaning should pay attention to carelessness

In winter, as the temperature drops, the climate will become drier. Many homeowners will find that the floor in the house is prone to cracking. Due to the high cost of flooring and the delicate and fragile paint surface, in order to maintain the original texture and natural colors of the floor at home, the correct cleaning and maintenance methods have become the most concern for everyone. topic of.

Moganshan solid wood floor top floor

First of all, no matter whether it is a composite wood floor or a solid wood floor, it should not be wiped directly with a wet mop that is stained with a cleaning agent. This moisture will permeate through the floor surface cracks, paint damage and corners into the floor, causing the floor to warp and mold. After rotting and waxing, the wax layer is not completely attached. A professional cleaning and maintenance product should be used to effectively maintain the floor's original moist texture and natural color, and no odor or stickiness after cleaning.

Solid wood floors should not be wiped directly with a wet mop. Special wood floor cleaners should be used to clean the floors so that the floor can maintain its original moist texture and prevent wooden boards from cracking. Because too much water can penetrate into the wood floor, causing the floor to become moldy and even rot. When using floor cleaners, try to wring the mop. If the surface of the wooden floor is not waxed or exposed to water, it is best to try it out in an unobtrusive place. Make sure there are no problems and then use it in large areas.

Second, if you want to avoid long-term stamping and wear on the floor, keep the floor shiny for a long time, it is necessary to clean the floor and then a layer of wooden floor wax maintenance agent. It should be noted that the floor must be completely air-dried and then waxed so that the wax layer does not completely adhere to the wooden floor. Instead, the floor appears a little white spot.

At the same time, due to the relatively dry winter and winter climate, the owner should minimize the window opening time when organizing the room. Appropriate increase in indoor humidity, humidifiers can be used when necessary, so that not only people have a good living, maintenance of the floor is also very helpful. Many owners may think that the outside air will come in winter, the temperature in the city will drop, and the phenomenon of floor separation will naturally weaken. In this regard, experts say that the real reason for floor separation from the seams is humidity, not temperature. In addition, the higher the air temperature, the more saturated the water, which means that the indoor humidity in winter is higher than the outdoor. At this time, the outside cold air will be exchanged in, which will only make the room dry.

Again, during the floor heating process, the hot and cold heat can damage the floor. Experts suggest that in the process of opening and closing geothermal heat, steps should be taken step by step, and the sudden rise and fall of temperature all affect the service life of the floor. Experts have told us that for the first time, geothermal heating should be used. Note that the temperature should be raised slowly. If the temperature is raised too quickly, the floor may crack and twist due to expansion. "And geothermal heating, the surface temperature should not exceed 30 °C, when the room temperature in the human body is the best ambient temperature below 22 °C, the life of the floor can also be guaranteed." Experts also said that when the weather is warm, the indoor is no longer When heating is required, it should be noted that the shutdown of the geothermal system must also take place slowly. Do not dip suddenly, otherwise it will also affect the service life of the floor.

Finally, since solid wood flooring and composite flooring are made of different materials, their maintenance methods are not the same and should be treated differently. Composite floor laminate flooring does not require waxing and painting. Never use sandpaper for polishing. Because the composite floor is different from the solid wood floor, its surface is already relatively smooth, using a special material, so basically do not need special maintenance, but also do a good job cleaning.

Links: three key points of moisture-proof kitchen decoration

Home maintenance nature floor del floor paint interior decoration humidifier heating window

UCF Pillow Bearing

The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Pillow blocks are usually referred to the housings which have a bearing fitted into them & thus the user need not purchase the bearings separately. Pillow blocks are usually mounted in cleaner environments & generally are meant for lesser loads of general industry. These differ from "plummer blocks" which are bearing housings supplied without any bearings & are usually meant for higher load ratings & corrosive industrial environments. However the terms pillow-block & plummer-block are used interchangeably in certain parts of the world.

However fundamental application of both types is the same which is to primarily mount bearings safely enabling their outer ring to be stationary while allowing rotation of the inner ring. The housing is bolted to a foundation through the holes in the base. Bearing housings are either split type or unsplit type. Split type housings are usually two piece housings where the cap and base can be detached. While certain series are one single piece housings. Various seals are provided to prevent dust and other contaminants from entering the housing. Thus the housing provides a clean environment for the expensive bearings to freely rotate hence increasing their performance and duty cycle.

Bearing housings are usually made of grey cast iron. However various different grades of metals can be used to manufacture the same.

Ucf Pillow Bearing,Ucf Pillow Block Bearing,Ucf 207 Flange Bearing,Flange Mounted Pillow Block Bearing

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com