Four practical tips for wall cabinet installation

>>>Expert advice: analysis of the reasons for the difference in cabinet prices

Wall cabinet as a kind of furniture fashion, is one of the standard configurations of home decoration in Europe and America. It is not only beautiful in appearance, but also can make full use of space. The internal grid can be used in a variety of combinations according to individual requirements. It is an ideal choice for modern living rooms. Want to have a set of thoughtful cabinets, in addition to the choice of quality assurance of the closet door brand, some necessary preparations need to pay attention:

First, the cabinet of the wall cabinet can be either a wall or a mezzanine, which not only ensures the efficient use of space, but also does not deform. But be sure to do the top and bottom level, both sides of the vertical, if there is an error, the required height difference between the left and right sides of the hole is less than 5mm, the bottom wall of the closet door can be adjusted through the debugging system to make up for errors.

Second, the installation of partitions at home cabinets generally has a drawer design, in order not to affect the use, design the position of the drawer should pay attention to: do three sliding doors should avoid the intersection of two doors; do two sliding doors should be Placed on the side of a door; when the folding door is done, the drawer should have a 17cm gap from the side wall.

Thirdly, when the track is installed as a cabinet body, it is required to reserve the size of the track. The reserved dimensions of the upper and lower tracks are 8 cm folding doors and 10 cm sliding doors.

Fourthly, the installation of closet doors is generally completed by professional personnel. The steps are: First fix the top rail, the front rail surface is in the same plane as the cabinet surface, and the upper and lower rails are laid flat in the reserved position. Then put the two doors into the track, measure the verticality of the door with a horizontal ruler or ruler, adjust the position of the upper and lower rails and fix it; check again whether the door is parallel to both sides, adjust the bottom wheel to adjust the door body , reach the border and the level of both sides; Finally, the anti-jump device is fixed, and show the quality protection book. According to this installation procedure, the user can verify whether the selected closet door brand is professional.

Kitchen Space Door Price Home Decor Furniture Drawer Cabinet Doors Home Cabinets Closet Doors Closet Doors

Hook And Loop Sanding Disc

Hook and loop sanding disc is also a classification of round sanding disc, it is also called self-adhesive sandpaper, which can be glued to the sanding disc tray and very convenient to use
Compared with Abrasive Fiber Disc , round disc hook and loop also can be a kind of Quick Change Disc , which is more convenient and cost-effective.
We use the high quality sandpaper rolls and total automatic Abrasive Sanding Disc punching machine, so the production ability is very enough and has ready stock.
Round sandpaper has the advantages of anti-clogging, anti-static, good flexibility, and high wear resistance.


Due to its wide range of uses, there are also many varieties of hook and loop sanding disc. The most commonly used are red sanding disc, yellow/gold sanding disc, green sanding disc, and white sanding disc, etc.
The sandpaper disc is using aluminum oxid abrasives, with grits as below: 40#, 60#, 80#, 120#, 180#, 240#, 320#, 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000#.
The abrasive polishing disc can be punched into various shapes, round, round with holes, triangle, rectangle, iron shape, neckline shape, etc.
This product is round abrasive disc size: 100mm, 125mm, 150mm, 180mm, 225mm or other size can be customized.
The holes best selling is with 6 hole, 8 holes, 15 holes, 17 holes or customized.

We can also supply Abrasive Flap Disc , Flap Disc Backing Pad , Flap Disc Adhesive Glue, Flap Wheels , Abrasive Machine (Flap Disc Making Machine, Abrasive Belt Making Machine, Sanding Disc Machine , Flap Wheel Machine ), Cotton Buffing Wheels , Nylon/non-woven Surface Conditioning Products, Cutting Wheels , Grinding Wheels etc. If you are interested please feel free to contact us.

Hook And Loop Sanding Disc,5inch 8 hole sanding disc,Abrasive Sand Disc,Alumina Sanding Disc,Angle Grinder Sanding Disc

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com