In the winter, the weather turned cold, and people were prepared for the winter of Enron. I don’t know if the furniture should be “over the winterâ€. If you do not pay attention to the maintenance method of winter furniture, it will greatly reduce the life of the furniture.
Minimize window opening time
Many people mistakenly believe that the window opening in winter and the indoor temperature drop, the phenomenon of cracks in wooden furniture will naturally decrease. In fact, the higher the air temperature, the more water the water contains under saturated conditions, which means that the humidity in the house is higher than that in the outdoor. Experts say that the real cause of cracks in furniture comes from humidity, not temperature. And this time the window ventilation will only change the cold air outside to make the room dry. Therefore, in the winter, the ventilation time should be reduced to maintain the original humidity in the room.
Keep away from heat
In winter, people usually use some heating tools to resist the cold. At this time, it should be noted that the furniture should be placed away from the heat source, at least 1 meter away. Because if the furniture is too close to the heat source, the moisture in the wood will evaporate too much, causing the seams and shackles of the furniture to shrink, causing deformation of the sputum and cracking of the panel.
Appropriately increase the humidity of the air
Moderate air humidity in the home is the key to furniture maintenance, because in the dry climate of winter, furniture wood is prone to water shrinkage and cracking, so properly increasing the humidity of the air in the home can effectively prevent the occurrence of cracks.
Avoid being scratched by hard objects
Due to the dry climate in winter, the wood is more fragile, coupled with the heating of the baking, the moisture in the wood is lost, the texture becomes loose, and the usual sturdy furniture is likely to be easily scratched during cleaning. Therefore, when cleaning, try not to use a sharp cleaning tool to touch the surface of the wood.
Jinwu Glass Fiber Co., Ltd , https://www.jwglassfiber.com